If a vehicle’s windshield has a chip in it, the owner can fix it with a glass repair kit. Before repairing, any debris that is on the windshield needs to be eliminated. Standard glass cleaners will remove dirty residue and will provide the glass with a clear surface. A glass repair kit includes several pieces that are often attached to fix small imperfections. A suction cup tool will attach to the glass that is around the damaged portion. Once the chip is centered beneath the tool, an applicator can be connected to it.
Epoxy is often added to an applicator to fill chips in the glass. A piece that is attached to the end of an applicator after the epoxy has been added will apply pressure to the repaired area and assist with adhesion. Once the epoxy has filled the spot and bonded, a piece of film needs to be placed over the repaired area. Before adding the film, the tools that were previously used can be removed. The epoxy may take a few hours to dry.
To determine when this has occurred, a visual inspection needs to be performed. When the epoxy turns clear, it has hardened and dried and the film can be removed. Once doing so, a vehicle can be driven and an individual can look out of the windshield without being distracted. As long as the glass is repaired properly, it will last for years. If a problem is more serious, however, an auto glass replacement in Boise ID may be necessary.
Sir Auto Glass & Calibration provides an Auto Glass Replacement in Boise ID that will be completed at a convenient time. An auto glass specialist will be able to meet a client at their location and will safely remove a damaged section of glass. Afterward, measurements of a windshield or window will be taken so that a replacement piece of glass will be the proper size. Once the new piece of glass is installed, a customer can drive their vehicle and will not need to worry about their visibility being affected any longer. Visit Sir Auto Glass & Calibration for more information.
